Tyco Electronics ET1528L User Manual

Page 28

TOUCHMONITOR SAFETY

This manual contains information that is important for the proper setup and maintenance
of your touchmonitor. Before setting up and powering on your new touchmonitor, read
through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation).

1. To reduce the risk of electric shock, follow all safety notices and never

open the touchmonitor case.

2. Turn off the product before cleaning. (See page 19 for Cleaning

Instructions.)

3. Your touchmonitor is equipped with a 3-wire, grounding power cord. The

power cord plug will only fit into a grounded outlet. Do not attempt to fit
the plug into an outlet that has not been configured for this purpose. Do
not use a damaged power cord. Use only the power cord that comes with
your Elo TouchSystems touchmonitor. Use of an unauthorized power
cord may invalidate your warranty.

4. The slots located on the sides and top of the touchmonitor case are for

ventilation. Do not block or insert anything inside the ventilation slots.

5. It is important that your touchmonitor remains dry. Do not pour liquid

into or onto your touchmonitor. If your touchmonitor becomes wet do not
attempt to repair it yourself.

P P E N D I X