Technicolor - Thomson HP 270 - Manual (Page 23)

22
EN
VIDEO PLAYBACK
Power Switch
SHUTTLE SEARCH
Ring (2/3)
Play/Pause
Button (4/6)
Stop Button (5)
Normal Playback
1 Load a tape ( ੬ pg. 13).
2 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “
” while pressing down
the Lock Button located on the switch. To start
playback, press 4/6.
•To stop playback, press 5.
•Turn the SHUTTLE SEARCH Ring anti-clockwise
(2) and release to rewind, or clockwise (3)
and release to fast-forward the tape during Stop
mode.
To Control The Speaker Volume . . .
.... press VOL. + to turn up the volume, or – to turn
down the volume.
NOTES:
● If Stop mode continues for 5 minutes when power is supplied
from a battery, the camcorder shuts off automatically. To turn
on again, set the Power Switch to “OFF”, then to “
”.
● The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
੬ pg. 23, 24).
● You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the “ ”
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “
”
does not appear.
• During Stop mode, none of the indications are displayed.
● When a cable is connected to the AV connector, the
sound is not heard from the speaker.
VOL. +/–
Speaker
Lock Button
Still Playback: Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
● When 4 /6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.
Shuttle Search: Allows high-speed search in either direction.
1) During playback, turn the SHUTTLE SEARCH Ring clockwise (3) and release for forward or anti-
clockwise (2) and release for reverse search.
2) To resume normal playback, press 4/6.
● During playback, turn the SHUTTLE SEARCH Ring clockwise ( 3 ) or anti-clockwise ( 2 ) and hold
it. The search continues as long as you hold the ring. Once you release it, normal playback resumes.
● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and
Playback Special Effects
Available only with the remote control (provided) ( ੬ pg. 63, 64).
VIDEO/MEMORY
Switch