Transition Networks E-PSW-TX-02 - Manual (Page 7)

4. OPERATION
The Transition Networks’ pocket switch requires no operator
intervention beyond occasionally monitoring LED status indicators.
POWER Steady green LED indicates connection to external
AC power.
NOTE: The port LED indicators provide separate data for each port.
100 (MB/S) Steady green LED indicates that port transmits and
receives at 100 Mb/s.
L(INK) Steady green LED indicates port link connection is
active.
H(ALF) D(UPLEX) Steady green LED indicates port sends and
receives data simultaneously over same cable.
R(ECEIVE) Blinking green LED indicates port is receiving data.
Connectors, Switches, and Indicators
Connectors
ON PORT 1 One (1) 10/100Mb/s RJ-45 twisted-pair connector
AND (E-PSW-FX-02 only) one (1) 100Mb/s ST fiber
connector pair
ON PORT 2 One (1) 10/100Mb/s RJ-45 twisted-pair connector
LED Indicators
POWER Steady green LED indicates connection to external
AC power.
NOTE: The port LED indicators provide separate data for each port.
100 (MB/S) Steady green LED indicates that port transmits and
receives at 100 Mb/s; dark LED indicates 10 Mb/s.
L(INK) Steady green LED indicates active port link
connection.
H(ALF) D(UPLEX) Steady green LED indicates half-duplex mode;
dark LED indicates full-duplex mode.
R(ECEIVE) Blinking green LED indicates port is receiving
data.
Switches (at surface opposite connectors)
DIP Allows selection, for each port, of operating speed
and mode or selection of Auto-Negotiation.
RESET Resets hardware to initial operating condition.
Transition Networks’ Pocket Switch 4 23
Port 1 LED Indicators
Port 2 LED Indicators
Power LED Indicator
Port 1 10BASE-T/100BASE-TX Connector
Port 1 100BASE-FX Connector
Port 2 10BASE-T/100BASE-TX Connector
Port 1 LED Indicators
Port 2 LED Indicators Power LED Indicator