Tangent 2.2 - Manual (Page 38)

Page 38
Time Entry
Use this screen to enter time for Time/Date Calculation. When you first open the
Time Entry screen, it will show you current time.
Hours, Minutes, Seconds
Type in the proper values or use the
up/down buttons.
AM/PM
If you are using the 12 hour mode,
then you can use the up/down but-
tons to change the AM/PM value.
24 Hour
Check this box to use 24 Hour
(Army) time. Uncheck it to use the
12 hour time. The default is whatever your Windows Regional Settings show.
Cancel Button
Close the Time Entry screen.
OK Button
Close the Time Entry screen and pass the result to Time/Date Calculations.
Calendar
Use this screen to check the calendar or to choose a date for Time/Date Calculation.
When you first open the calendar, it will show you the current date, then it will show
you the last date you selected.
The calendar is written in a manner where it is completely Y2K compliant.
Month
Chose a month to display.
Year
Choose a year to display. You can choose
any year between 1200 and 2200.
Date
Click on the date you wish to set (or see). If
you double-click on the Date, you will be able
to add notes (tasks or comments) for his date.
Cancel Button
Close the calendar.
Today Button
Set the calendar to today's date.
Find Button
Search the Daily Notes for any information.
The results of your search will be displayed in a new Scratch Pad window.
Alarm Button
This button allows you to open the Set Reminder Alarms screen right from the
calendar.
Make Topmost Window (Up Arrow button)
Click this button if you want the Calendar to "float on top" of all other windows.