Tricity Bendix BD 921/2 - Manual (Page 40)

vii) Set the oven control to the required
temperature and select the required function.
The oven indicator neon should be OFF and
the AUTO display will glow.
Note: When the automatic timed period starts,
the oven indicator neon will cycle ON and
OFF during cooking.
B) TO SET THE TIMER TO SWITCH OFF ONLY
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ), depress the
increase control ( + ) until the required length
of cooking time is displayed, e.g. 2 hrs 15
mins as Fig. 10. Depress the decrease control
(-) if necessary.
iv) Release the buttons. The AUTO display will
glow and the time of day will be displayed
after 5 seconds.
v) Set the oven temperature.The oven indicator
neon should be ON.
vi) To check the stop time during the cooking
period, simply press the stop time button
(------) and the stop time will be displayed, as
Fig. 11.
4 TO RETURN THE COOKER TO
MANUAL OR TO CANCEL AN
AUTOMATIC PROGRAMME
To cancel an automatic programme, or return the
cooker to manual operation, follow the steps
given below.
At the end of a timed cooking period, the AUTO
light will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of
the 4 left hand side buttons as Fig. 12.
Turn oven control to the OFF position. The AUTO
display will continue to flash .
Press ( ) button. The AUTO display will go out.
Fig.13.
Turn the multifunction selector and oven control
ON to check that the oven operates manually.
The oven indicator neon will glow.
Turn all oven controls OFF. No indicator neons
should be displayed.
40
Fig. 9
Fig.10
Fig.11
Fig.12
Fig.13
A
U
T
O
A
U
T
O