Tripp Lite PDUMH20HVNET - Manual (Page 2)

Alert notifications via email or SNMP traps offer immediate event notification
Firmware upgrade ability supports future product enhancements
Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP
protocols
Fully compatible with FREE PowerAlert Network Management System / NMS Software
1U horizontal rack installation supported in 2 or 4 post racks with included mounting brackets
Mounting brackets support wall-mount and under-counter installation in many applications
Included cord retention brackets
Specifications
OVERVIEW
PDU Type Switched
OUTPUT
Frequency
compatibility 50 / 60 Hz
Output nominal
voltage 200; 208; 230; 240
Overload protection Outlets are arranged in a single unbreakered load bank
Outlet quantity / type 8 C13 outlets
Outlet Type IEC-C13
Customized load
management
receptacles Each outlet is individually controllable via remote interface
INPUT
PDU Input Voltage 200; 208; 230; 240
Maximum Input Amps
(A) 20
Maximum Input Amps
(A) Details 20A maximum (Agency de-rated to 16A continuous)
PDU Plug Type NEMA L6-20P; IEC-320 C20
Input cord length (ft.) 8.5
Input cord length (m) 2.6
Phase Single-Phase
LEDS ALARMS & SWITCHES
Switches n/a
Front panel LEDs 8 power availability LEDs confirm power off/on status for each built-in outlet
PHYSICAL
Shipping Dimensions
(HWD/in) 5.3 x 20.7 x 23.2
Shipping Dimensions
(HWD/cm) 13.5 x 52.6 x 37.6
Shipping weight (lbs) 14.2
Shipping weight (kg) 6.4