Chapter 2: installation, 1 mounting the switch on a desk, 2 mounting the switch in a rack – TP-Link TL-SF2109P User Manual
Page 7
TL-SF2109P/TL-SF2117P/TL-SL2226P
Ethernet Smart Switch User Guide
Chapter 2: Installation
2.1 Mounting the Switch on a Desk
Before place the Switch on a desk, attach four rubber footpads to the flutes on the Switch
bottom, then lay the Switch on the desktop, where can be have as much as 5kg placed
on top.
Note
: Make sure there is a grounded AC outlet within 1.5 meters, and working well.
Make sure there is free space for radiating heat and air.
Make sure not to place anything to heavy on top of the switch.
2.2 Mounting the Switch in a Rack
The dimension of the Switch is designed according to the standard 19” rack-mountable
steel case of Electronic Industries Association.
Turn off all the equipment connected to the Switch before mounting it in the rack, then
rivet the two “L” brackets onto each side of the Switch, fasten it with screwes in the rack.
Figure 2-1 Rivet the “L” brackets onto the Switch
- 4 -