Tru-Test Electric Fence Security System - Manual (Page 9)

9
Panic Alarm
In an emergency, a panic alarm can be raised manually by entering Panic mode.
Entering Panic mode
Entering Panic mode using the Keypad
Enter the key sequence:
COMMAND
KEY
1
COMMENT
Entering Panic mode Hold for 3 seconds
Activating the alarm manually using the panic button overrides all system settings and immediately
activates the siren and auxiliary equipment. The electric fence is turned off to allow people to come
to your assistance. The siren will not time-out and will continue until you exit Panic mode.
Note: A panic alarm cannot be raised using the Keyswitch.
Exiting Panic mode
Exiting Panic mode using the Keyswitch
The Keyswitch can be used to exit Panic mode:
1
Insert the key into the Keyswitch.
2 Rotate ¼ turn to the right and leave until a fast beeping is heard.
3 Return the key back to the upright position and remove key.
Exiting Panic mode using the Keypad
The Keypad can be used to exit Panic mode by entering the UPIN or OPIN, then press :
COMMAND
KEY
1
KEY
2
KEY
3
KEY
4
KEY
5
Exit Panic mode using:
User PIN U P I N
or
Owner PIN O P I N