Installation instructions – Tricity Bendix E 750 User Manual
Page 51
Check that the mounting brackets are level.
They can be adjusted if necessary by using
the extra holes at the ends of the brackets.
Once the brackets are level, drill a pilot hole
through the central hole in the bracket and fit
the remaining screw
HOW TO FINISH UNPACKING
Place packed cooker next to the space in
which it will be installed. See Fig. 8.
Remove the cooker packing except for
bottom tray which should be left in position
until the cooker is ready to be fitted into its
cabinet.
Ensure the owner is given these operating
instructions.
51
INSTALLATION INSTRUCTIONS
Fig.8
Important: Switch off at mains, miniature
circuit breaker and, if appropriate, remove fuse
before commencing any electrical work.
See also other documents in the category Tricity Bendix Kiln:
- BS 600 (36 pages)
- TBS 613 (18 pages)
- SB 421 (36 pages)
- BS 612/2 (40 pages)
- BD900 (35 pages)
- BD 912/2 (40 pages)
- SOMERSET (44 pages)
- BD 912 (40 pages)
- TBF 610 (20 pages)
- SURREY (38 pages)
- SB 422/423 (32 pages)
- TBS 603 (22 pages)
- BS 613/2 (40 pages)
- CSIE316 (32 pages)
- BD 985 (40 pages)
- BS 611/BS 621 (48 pages)
- SIE 225 (24 pages)
- SI 400GR (32 pages)
- TBD903 (40 pages)
- BD 931 (52 pages)
- SB 200 (24 pages)
- E710 (52 pages)
- SB462 (32 pages)
- BS 641 (52 pages)
- MDB700 (32 pages)
- BD 913/2 (40 pages)
- BS 615 SO (40 pages)
- DURHAM (52 pages)
- BD 911 (40 pages)
- SIE 250 (28 pages)
- SB 415GR (28 pages)
- BS 685 (40 pages)
- DEVON (44 pages)
- RE50M (28 pages)
- SB 461 (36 pages)
- BS680-1 (40 pages)
- SI 055 (28 pages)
- TBD913 (36 pages)
- TBS 605 (26 pages)
- BS 631 (52 pages)
- SIE 400 (32 pages)
- BD 921 (56 pages)
- SB200 (24 pages)
- BS 621/2 (40 pages)