Quantum DX - Manual (Page 4)

4 Basic Operation Instructions DX Scanner
INTRODUCTION
Welcome to Quantum Rehab, a division of Pride Mobility Products
Corporation (Pride). Quantum Rehab is dedicated to the customization of
power chairs for users with advanced rehabilitation and mobility issues.
Quantum Rehab also expands possibilities for enhanced healthcare attendant
control over power chair functions to provide a secondary level of support
for our customers where necessary.
Dynamic DX Scanner Control
The Dynamic DX Scanner Control allows the power chair user to control
drive modes, actuators, and secondary remote controls.
This manual is designed to explain basic operation of the following functions
available with the Scanner:
1. Select Mode
- Allows the user to choose one of three different modes—Drive, Seat, or
Environmental.
2. Drive Mode
- Allows the user to control the speed and direction of the power chair.
3. Seat Mode
- Allows the user to select and adjust one of four seat actuators.
4. Environmental Mode
- Allows the user to select and control the attached environmental control
or communication device.
5. Scanning Speed Adjustment
- The user can adjust the speed with which the Scanner cycles through
the available options.
Figure 1 provides information on the Scanner Control components and
connections. Use this diagram to familiarize yourself with the function and
location of each component before using the Dynamic DX Scanner Control.