QMS Scanner User Manual
Page 18
4-2
1.
Copy: Press to start copy.
2.
Power/Copy LED: The LED indicator turns green when power is on and turns
flashing during copying.
3.
All Clear: Clear your current settings and return to the default settings.
4.
Copy Quality: Select your Copy quality: Normal (300 dpi), or Quality (600 dpi).
5.
Copy Count: Choose the number of copies from 1 to 99. Increase the value of the
numeric entries by the (
) button or decrease the value by the (
) button.
6.
Select: Select your printer model. (Currently QMS SC-100 supports only PCL
printer, therefore, as long as your printer has PCL emulation, it is not necessary to
select printer model.)
7.
: Go to the previous item displayed in the Message Display window or increase
the value of the numeric entries.
8.
: Go to the next item displayed in the Message Display window or decrease the
value of the numeric entries.
9.
Printer Select: Select your printer model. (Currently QMS SC-100 supports only
PCL printer, therefore, as long as your printer has PCL emulation, it is not necessary
to select printer model.)