Quantum Synergy Solution none - Manual (Page 7)

Installation and Care Instructions 7
www.quantumrehab.com Synergy Structure
CLEANING
The Synergy Structure can be easily cleaned.
To clean the Synergy Structure:
1. Locate the zipper on the rear side of the outer cover. See figure 2.
2. Unzip the outer cover and pull out the inner cushion, which is wrapped
in a fluid-resistant cover.
3. Wash the outer cover in a washing machine on the COLD setting.
WARNING! To prevent damage to the seat cover, do not use bleach
when cleaning the outer cover.
4. Spray the inner cover with a disinfectant, then wipe it clean.
WARNING! To prevent damage to the inner cushion, do not submerge
it in water.
5. Allow both the outer and inner covers to air dry.
WARNING! To prevent shrinking of the outer cover, do not dry it in a
clothes dryer.
6. Once both covers are dry, put the inner cushion back inside the outer
cover. Zip the outer cover closed, and place the Synergy Structure back
onto the seat of your chair.
Figure 2. Synergy Structure
OUTER COVER
INNER CUSHION WRAPPED IN
FLUID-RESISTANT COVER
ZIPPER ON
REAR SIDE