Table 2, System defaults – Quantum Tape Drive A-Series User Manual
Page 24
Chapter 2 Getting Started
Resetting System Defaults
Quantum A-Series Tape Drives User’s Guide
8
4
After the third ejection, connect your network cable and switch your
cartridge write protection on or off (as you need it), then reboot the
drive.
You can now set up the drive using the default IP address (10.10.10.10) as
the flash memory has been erased.
Table 2 System Defaults
Name
Password/Setting
Static IP address
10.10.10.10
Netmask
255.255.255.0
Main login
admin
Username
root
Default password
password