QVS AS-154P - Manual (Page 3)

Installation
Installation (For 4-To-l Mode)
AS-154P
l
Select desired operation by DIP switch and slide switch.
l
Turn off all PCs and printer.
l
To connect PCs to AS- 154P use DB-25 male-to-male
cables.
l
To connect AS-154P to printer, use 25pin-to-36-pin
male-to-male cable.
l
Turn on all PCs and printer and AS-154P is ready.
* Scanning LED indicating AS-154P is in Auto Link
mode.
* Non-scanning LED indicating AS154P is in
Manual mode or prints data in Auto mode.
Fig. A 4-IN- 1 -OUT configuration
-2-