Qualcast Cobra 32 - Manual (Page 8)

ix. Failure is due to normal wear. The following parts
are considered as wearing parts. Their life is
dependant on regular servicing and they are
not therefore, normally covered by the guarantee:
Blades
Bearings
Cables
The cost of routine maintenance of the product is
not covered by the guarantee.
It is in your best interest to follow the Operating
Instructions for your machine, as a properly cared for
product should give many years of excellent
service.
Should you require replacement parts, always insist
on genuine Qualcast replacement parts. Any
damage caused to the product through the fitting
of parts not made by Qualcast is not covered by the
guarantee.
Your statutory rights are not affected by this
guarantee.
Environmental Information
Your product has been manufactured under an
environmental management system using, when
possible, the most environmentally responsible
materials and processes, and with the potential for
recycling at the end of its life. The packaging is also
recyclable.
When the time comes to dispose of this product
please consider the environment and take it to a
recognised recycling facility.
(Please contact your local authority for location
information).
Qualcast guarantees this product against
manufacturing defects. We will repair (or replace at
our option) if a manufacturing defect occurs within
the guarantee period as long as it has only been
subjected to domestic use.
For the purpose of this guarantee, domestic use
means any use of the product on the property
belonging to the purchaser and forming part of the
garden area of his/her dwelling.
The guarantee period is 5 years parts and two years
labour costs from date of purchase.
To obtain a repair under this guarantee:
• Take the product to an approved service agent.
• Show your dated proof of purchase.
• Show this guarantee.
The guarantee does not apply if:
i. You cannot provide dated proof of purchase.
ii. The product has been resold by the original
purchaser (this does not apply in the Republic
of Ireland), or has been used under hire.
iii. The product has been modified to change
the manufacturers specifications, or if non
genuine replacement parts have been fitted.
iv. Any previous repair was undertaken by anyone
other than an approved service agent.
v. The fault is due to maladjustment, abuse, neglect
or accidental damage.
vi. The fault is due to lack of lubrication or
maintenance.
vii. Damage to any part, particularly the drive or
cutting mechanism has been caused by
allowing the product to strike solid objects.
viii. The product develops a fault due to abnormal
use.
The Guarantee