beautypg.com

Wl3082 connections, Wl212-sw connections – QSC Audio WL3082-WH User Manual

Page 12

background image

12

WL3082 Connections

The WL3082 input connectors are a pair of Neutrik NL8's
wired in parallel. See Table 2 or the pinout on the
WL3082 input plate (on rear of enclosure).

The WL3082 loudspeaker is not equipped with
a crossover network. All signal processing
must be done before connecting audio power
to the loudspeaker. Do not connect full-range
audio to the high-frequency transducer or dam-
age may result!

WL212-sw Connections

Input Connections

The WL212-sw is equipped with two NL8 connectors with
pins 1+ and 1- connected to the transducers. All other
NL8 connections are paralleled between the two NL8s.
Additionally, pins 1+ and 1- are parallel connected to the
NL4s.

The WL212-sw is also equipped with two NL4 connectors
that have pins 1+ and 1- connected to the transducers.
Pins 2+ and 2- of the NL4s are parallel connected. Only
pins 1+ and 1- of the NL4s are paralleled with the NL8s
1+ and 1- pins.

Please refer to Tables 2 and 3 for pinouts. The pinouts are
printed on the input plate label, as well.

Note: pin numbers 1+ and 1- of all connectors
are wired in parallel. Pins 1+ and 1- are the
only parallel interconnect between the NL4
and the NL8 connectors. All remaining connec-
tions of the NL4 and NL8 connectors are inde-
pendent.

Table 3: WL212-sw NL8 Connector Pinout

PIN

Connection

1+

Low frequency transducers + (4 Ohms)
Also connected to NL4 Pin 1+

1-

Low frequency transducers - (4 Ohms)
Also connected to NL4 pin 1-

2+

LF

2-

LF

3+

MID

3-

MID

4+

HF

4-

HF

Table 2: WL3082 Connector Pinout

PIN

Connection

1+

Through

1-

Through

2+

Right low frequency transducer + (16 Ohms)

2-

Right low frequency transducer - (16 Ohms)

3+

Left low frequency transducer + (16 Ohms)

3-

Left low frequency transducer - (16 Ohms)

4+

High frequency transducer + (16 Ohms)

4-

High frequency transducer - (16 Ohms)

Table 4: WL212-sw NL4 Pinout

Pin

Connection

1+

Low frequency transducers + (4 ohms)
Also connected to NL8 pin 1+

1-

Low frequency transducers - (4 ohms), also
connected to NL8 pin 1-

2+

Through

2-

Through

This manual is related to the following products: