QSC Audio ILA FB2082-I - Manual (Page 13)

13
WL2082-i Specifications
Frequency Response: 80 - 20,000 Hz (+/- 3 dB)
Frequency Range: 68 - 22,000 Hz (-10 dB)
Maximum SPL (continuous/peak): HF: 126/132 dB LF: 122/128 dB
Nominal Coverage (-6 dB included): Horizontal: 140 degrees (500 Hz to 3.2 kHz)Vertical: dependant on cumulative splay angle
Transducers:
High Frequency: Dual 50W, 8 Ohm 1 inch exit, 1.75 inch titanium diaphragm, neodymium magnet assembly
Low Frequency: Dual 200W, 16 Ohm 8 inch cone transducer, 2 inch voice coil, neodymium magnet assembly,
weather resistant cone
Acoustic Crossover Frequency: High to Mid: 2000 Hz Mid to Low: 230 Hz
Input Sensitivity: HF: 106 dB
LF: 96 dB
Weight: Net: 37 lb (16.8 kg) Shipping: 45 lb (20.5 kg)
Enclosure: High-impact Polystyrene with ultraviolet (UV) protectant, paint finish.
Grille: Perforated aluminum
Connectors: Two (2) Neutrik NL8 in parallel (wired as shown in Table 2)
Working Load Limit Information:
Component Weight 5:1 Design Factor 7:1 Design Factor 10:1 Design Factor
WL2082-i Loudspeaker 37 lb (16.8 kg) 889 lb (403.2 kg) 634 lb (288.3 kg) 445 lb (201.8 kg)