Playback – Olympus VN 7200 User Manual
Page 5
5
EN
• If the number of files inside the
recording folder reached 200 or
the memory becomes full, you will
not be able to record any further,
and [FULL] will be displayed.
Select another folder or delete any
unnecessary file before recording.
• When the remaining recording
time is less than 60 seconds, the
recording indicator light starts
flashing. When the recording time
is decreasing to 30 or 10 seconds,
the light flashes faster.
Recording from external microphones
or other devices:
External microphones and other
devices can be connected and the
sound can be recorded. Microphones
supported by plug-in power can also
be used.
"
• Do not plug and unplug devices
into the recorder’s jack while it is
recording.
• The built-in microphone will
become inoperable when an
external microphone is plugged
into the recorder’s MIC jack.
Playback
1 Select the file to be played from the
folder.
• Press the FOLDER/INDEX
button to select the folder, and
the 9 or 0 button to select
the file.
2 Press the `OK button to start
playback.
Press the + or − button to adjust to
a comfortable listening volume.
• The volume can be adjusted
within a range from [00] to [30].
Press the STOP (4) button at any
point to stop playback.
Playback through earphone:
An earphone can be connected
to the EAR jack of the recorder for
listening.
"
• To avoid ear irritation, insert the
earphone after turning down the
volume level. When you listen with
the earphone during playback, do
not raise the volume too much.
It may cause hearing impairment
and a decrease in hearing ability.
Forwarding and rewinding:
While the recorder is during playback
mode, press and hold the 9 or
0
button.
• When you release the button
the recorder will resume normal
playback.
• If there is an index mark in the
middle of the file, the recorder will
stop once at that position.
Locating the beginning of a file:
While the recorder is during stop
mode or playback mode, press the
9
button.
• The recorder skips to the
beginning of the next file.
While the recorder is during playback
mode, press the 0 button.
• The recorder skips to the
beginning of the current file.
While the recorder is during stop
mode, press the 0 button.
• The recorder skips to the
beginning of the previous file. If
the recorder is in the middle of a
file, it will return to the beginning
of the file.
While the recorder is during playback
mode, press the 0 button twice.
• The recorder skips to the
beginning of the previous file.
"
• During playback, skipping to the
beginning of a file that contains an
index mark will make the playback
start from the closest index mark
position.
• When you try to skip to the
beginning of the file during
playback, setting the [SKIP]
to [ON] will make the recorder
forward skip 10 seconds or reverse
skip 3 seconds.
Changing the playback speed
1 Press the `OK button to start
playback.
2 Press the `OK button again to open
the playback speed adjustment
display.
Press the + or − button to adjust
the playback speed.
[1.0 PLAy]: Playback at normal
speed.
[0.5 PLAy] – [0.9 PLAy]: Playback
speed slows down.
[1.1 PLAy] – [2.0 PLAy]: Playback
speed becomes faster.
Press the `OK button to complete
the setting.
• If you leave the recorder for
3 seconds, the setting will be
applied and the recorder will
return back to the original screen.
"
• Even if playback is stopped, the
changed playback speed will be
retained. The next playback will be
at that speed.
• If you set the noise cancel function
to [ON], you will not be able to
change the playback speed.
How to begin segment repeat
playback: (For VN-7200 only)
1 Press the `OK button to start
playback.
2 Press the REC (s) button at the
point you want to start segment
repeat playback.
• [A] will flash on the display.
• Reaching the end of a file while
[A] is still flashing will make
that point the end position, and
make repeat playback start.
Press the REC (s) button again at
the position where you want to end
segment repeat playback.
• [A-b] will appear on the display.
• The recorder repeatedly plays
back the segment until the
segment repeat playback is
canceled.
• As in normal playback mode,
playback speed can be changed
during segment repeat playback
as well.
Current folder
File number
Elapsed playback time