Olympus APS Point and Shoot Film Camera i-10 - Manual (Page 11)

TAKING PICTURES
1. Turn the lens barrier switch to
turn on the camera.
2. Press the shutter release button
halfway to make sure the flash
ready lamp lights.
• When the flash ready lamp is
blinking, the flash is being
recharged and the shutter cannot
be released.
3. Compose the shot in the viewfinder.
Press the shutter release button
to take the picture.
• Working distance: 1.0 m (3.3 ft)~ .
•Always turn off the camera when
you finish taking pictures.
WARNING: SERIOUS EYE
DAMAGE MAY RESULT FROM
LOOKING DIRECTLY AT THE SUN
THROUGH THE VIEWFINDER.
11