Oregon Scientific STARCK PS L02A - Manual (Page 20)

EN
19
ROTATE IMAGE
The ROTATION switch is located on the back of the
unit. Rotate to adjust.
FOCUS IMAGE
The FOCUS switch is located on the back of the unit.
Rotate to adjust.
CONTINUOUS PROJECTION
The AC power adapter must be plugged in to use this
feature (→ pg.8).
Press and hold SNOOZE/LIGHT for 2 seconds when
the projection is on. When activated, the time and alarm
atatus will project continuously
Press and hold SNOOZE/LIGHT for 2 seconds again
to deactivate.
RESET SYSTEM
The RESET buttons are located in the battery
compartments for the main and remote units. Press
these buttons with the tip of a blunt object (such as a
ball point pen) whenever you change the batteries, or
whenever performance is not behaving as expected
(e.g., unable to establish radio frequency link with
remote unit or automatic clock, etc.) This will return all
settings to default value, and you will lose all stored
information (minimum / maximum temperature and
humidity, etc.).
PS-L02A English r8 op 2/13/04, 12:28 PM 19
Black