Optimus 120-2117 - Manual (Page 9)

Note: To improve reception of strong stations, press LO/DX. The LO
indicator lights.
5. Adjust VOL, BAL and TONE, as desired.
Cassette Player Operation
WARNING: To prevent hearing damage, always turn the volume to its lowest
level before you begin listening to a tape.
CAUTION: Avoid using C-120 cassette tapes. They are very thin and can
easily become tangled in the tape-handling parts.
Follow these steps to play a cassette tape.
1. Take up any slack by turning the cassette's hub with your finger or a
pencil. (Avoid touching the tape.)
2. Turn ON/VOL clockwise until it clicks to turn on the stereo.
3. Insert the tape into the cassette compartment with its open edge to
the right. The tape begins to play, and the tape indicator lights.
4. If you are playing a metal or CrO2 tape, press MTL. The MTL indictor
lights.
5. Adjust VOL, BAL and TONE to suit your listening preference.
6. Press (/\/>>) in all the way to stop the tape and eject the cassette.
The radio plays.
CAUTION: We recommend you press (/\/>>) as soon as you finish playing a
tape or before you leave your vehicle, to release it from the
tape handling parts. This reduces the possibility of a tape
being inadvertently tangled or damaged.
Note: When a tape reaches the end, the cassette player automatically stops
and the radio plays, but the cassette player does not eject the tape
Fast-Forward and Rewind
To fast-forward the current side, press (/\/>>) about half-way in and the
button locks. The tape quickly winds. To stop fast-forward, press gently
and lightly and the button releases.
To rewind a tape, simply eject the tape by pressing (/\/>>) all the way