Optimus STEREO MATE SCR-96 User Manual
Page 25
25
1. Load a blank cassette tape (or one you want to
record over) into the tape compartment.
2. Connect the microphone to the cassette
recorder’s
MIC
jack. Point the
L/R
(left/right) ele-
ments of the microphone toward the sound
source as shown, or clip it to the speaker’s tie.
Avoid pointing only one end (
L
or
R
) toward the
sound source.
3. Set
TAPE/RADIO
to
TAPE
.
4. Be sure
DIRECTION
is set to
FWD
, then hold
down
RECORD
and press
PLAY
so recording
starts. Recording continues until the tape
reaches the end. To stop recording sooner,
press
STOP
.
Note: Set
PAUSE
to
ON
to temporarily stop
recording. Set
PAUSE
to
OFF
to continue record-
ing.
14-1239a.fm Page 25 Wednesday, August 25, 1999 4:00 PM