Oki lan 7100e+ - Manual (Page 46)

46 Network print server
|
Problems printing self diagnostics
test and configuration
Fax machine does not print
• Check that DIP switches 3 (configuration printing) and 4
(self-diagnostics testing) have been turned on. Turn the
fax machine off before changing the DIP switch settings.
• If the fax machine is on-line, turn the power switch off and
then on.
NG printed in self-diagnostics test results
If the ROM check or RAM check result is NG (no
good).
•
After checking that the network print server is installed
correctly, switch the fax machine off and then on.
If the EEPROM check result is NG.
•
After checking that the network print server is installed
correctly, switch the fax machine off and then on.
• Turn DIP switch 2 to the ON position to initialize the
network print server print server. Retest after resetting.
If NIC Check is marked with NG.
• After checking that the network print server is installed
correctly, switch the fax machine off and then on.
• Check that the network cable is properly connected. Try
connecting the fax machine to a network in another
segment if possible. Also, try another cable.
If the fax machine prints a different network format
from that of the network to which it is connected.
•
After checking that the network cable is properly
connected, switch the fax machine off and then on.
• Replace the network cable connected to the fax machine
and switch the fax machine off and then on.