Omega Engineering OME-A826PG - Manual (Page 28)

OME-A-826PG Software Manual [Win 95/98/NT]
2.3.2 A826.PAS (for Win NT)
unit A826;
interface
type PSingle=^Single;
type PWord=^Word;
type PInteger=^Integer;
type PSmallInt=^PSmallInt;
const
//***************** DEFINE A826 RELATIVE ADDRESS *****************/
TIMER0
= $00;
TIMER1 = $01;
TIMER2 = $02;
TIMER_MODE = $03;
AD_LO = $04; //* Analog to Digital, Low Byte */
AD_HI = $05; //* Analog to Digital, High Byte */
DA_CH0_LO = $04; //* Digit to Analog, CH 0 */
DA_CH0_HI = $05;
DA_CH1_LO = $06; //* Digit to Analog, CH 1 */
DA_CH1_HI = $07;
DI_LO = $06; //* Digit Input */
DO_LO = $0D; //* Digit Output */
CLEAR_IRQ
= $08;
SET_GAIN = $09;
SET_CH = $0A;
SET_MODE = $0B;
SOFT_TRIG = $0C;
POLLING_MODE
= 1;
DMA_MODE = 2;
INTERRUPT_MODE = 6;
//*** define the gain mode ***/
A826_BI_1
= 0;
A826_BI_10 = 1;
A826_BI_100 = 2;
A826_BI_1000 = 3;
A826_UNI_1 = 4;
A826_UNI_10 = 5;
A826_UNI_100 = 6;
A826_UNI_1000 = 7;
A826_BI_05 = 8;
A826_BI_5 = 9;
A826_BI_50 = 10;
A826_BI_500 = 11;
A826_BI_2
= 1;
A826_BI_4 = 2;
Date: Aug-15-2000 Ver: 2.2 Page 26