Preparation for use, Operations – Sylvania RSDCF2703 User Manual

Page 3

PICTURE ADJUSTMENT

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel)

▲ or ▼ button to point to "[ENGLISH]".

5) Select "ENGLISH" or "FRANÇAIS" = French by using

the VOL(ume)

▲ or ▼ button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE

:You MUST PRESET channels BEFORE using CHANNEL

▲ or ▼ button.

To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel)

▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲ button.

4) Press the CH(annel)

▲ or ▼ button to point to "AUTO MEMO".

Then, press the VOL(ume)

▲ button.

The tuner scans and memorizes all active channels in your area.

●

The TV distinguishes between standard TV channels and cable (CATV)
channels.

●

When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.

●

When you press the CH(annel)

▲ or ▼ button after selecting AUTO MEMO,

the tuner will stop at the memorized channels only.

●

The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO MEMO action again when reception conditions are better.

[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel)

▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲ button.

3) Press the VOL(ume)

▲ button so that "ADD/DELETE" is selected.

4) Use the CH(annel)

▲ or ▼ button to select the channel you wish to put

into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.

●

Press the VOL(ume)

▲ or ▼ button to light up the channel number

in LIGHT BLUE if you wish to add the channel into memory.

●

Press the VOL(ume)

▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.

Type of

broadcast

Regular

-None-

Stereo

broadcast

STEREO

SAP

Menu

Selection

MAIN

MONO

SAP

-None-

MONO

STEREO

SAP

MAIN

PREPARATION FOR USE

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)

▲ or ▼ button.

3) Adjust the volume to the desired listening level using the VOL(ume)

▲ or ▼ button.

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP

button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
timer will be displayed on the screen when you press the
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel)

▲ or ▼ button to point

to "CAPTION".

3) Press the VOL(ume)

▲ or ▼ button to select

the mode you wish.

4) When done, press the MENU button to exit

the menu.

: Press the VOL(ume)

▲ or ▼ button.

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

ADD/DELETE
AUTO MEMO

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

[To Select STEREO, MONO or SAP in Stereo broadcast]

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel)

▲ or ▼ button to point to "TV SOUND".

3) Press the VOL(ume)

▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or

[SAP].)

To show the status, press the
DISPLAY button on the remote
control.

SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.

Type of

broadcast

Regular

-None-

Stereo

broadcast

STEREO

SAP

Menu

Selection

MAIN

MONO

SAP

-None-

MONO

STEREO

SAP

MAIN

Type of

broadcast

Regular

-None-

Stereo

broadcast

STEREO

SAP

Menu

Selection

MAIN

MONO

SAP

-None-

MONO

STEREO

SAP

MAIN

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MONO]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]

: Press the VOL(ume)

▲ or ▼ button.

BRIGHT

CONTRAST

GAME MODE

COLOR

TINT

SHARPNESS

ON
to increase
brightness
to increase
contrast
to brilliant

to green

to clear

OFF
to decrease
brightness
to decrease
contrast
to pale

to purple

to soft

VOL(ume)

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the VOL(ume)

▲ button so that "PIC-

TURE" is selected.

3) Select the feature you wish to adjust with

the CH(annel)

▲ or ▼ button and adjust it

with the VOL(ume)

▲ or ▼ button.

OPERATIONS

: Press the CH(annel)

▲ or ▼ button.

Note:

●

In the above steps, the picture adjustment display will disappear from the TV screen automati-
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)

▲ button so that "PICTURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly

until the display returns to the screen.

[USING THE GAME BUTTON]
You can set the Game mode and front AUDIO/VIDEO input mode at the same time by pressing
the GAME button on the remote control. “GAME” appears on the TV screen.

●

To exit the Game mode and external input mode, press the INPUT SELECT button on the
remote control.

●

To cancel the Game mode only, adjust the Picture Control. In this case, “VIDEO2” instead of
“GAME” appears on the TV screen.

●

If you press the GAME button when the TV is off, the TV turns on and will be in the Game
mode and external input mode automatically.

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ C1]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ T1]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]

[-]

GAME MODE

[+]

OFF

[-]

BRIGHT

[+]

[-]

CONTRAST

[+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]

SHARPNESS

[+]

L6625CR.QX33 03.3.26 0:04 AM Page 3