Outlaw Audio 7075 - Manual (Page 10)

10 Outlaw Audio
Owner’s Manual
Specifications
Model 700 Model 715 Model 7075
Power Output (all channels driven) 7 x 200 watts RMS @ 8 ohms 7 x 125 watts RMS @ 8 ohms` 7 x 75 watts RMS @ 8 ohms
FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD;
7 x 300 watts RMS @ 4 ohms 7 x 190 watts RMS @ 4 ohms 7 x 115 watts RMS @ 4 ohms
FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD
Frequency Response (at rated output) 20Hz -20kHz ± 0.1 dB 20Hz -20kHz ± 0.1 dB 20Hz -20kHz ± 0.1 dB
Total Harmonic Distortion (THD) Less than 0.05% at rated output, Less than 0.05% at rated output, Less than 0.05% at rated output,
all frequencies; all frequencies; all frequencies;
less than 0.01% at 1kHz less than 0.01% at 1kHz less than 0.01% at 1kHz
Intermodulation Distortion (IMD) Less than 0.05% at rated output Less than 0.05% at rated output Less than 0.05% at rated output
Power Bandwidth 5Hz - >100kHz +0/-3 dB 5Hz - >100kHz +0/-3 dB 5Hz - >100kHz +0/-3 dB
Damping Factor Greater than 400 from 10Hz - 400Hz Greater than 400 from 10Hz - 400Hz Greater than 400 from 10Hz - 400Hz
Crosstalk Greater than -90dB from 20Hz - 20kHz Greater than -90dB from 20Hz - 20kHz Greater than -90dB from 20Hz - 20kHz
Gain Voltage gain of 28dB Voltage gain of 28dB Voltage gain of 28dB
Slew Rate 50V/Microsecond 50V/Microsecond 50V/Microsecond
Input Impedance Nominal 50k ohms Nominal 50k ohms Nominal 50k ohms
Input Sensitivity 1.43V for Full Rated Output 1.00V for Full Rated Output 1.00V for Full Rated Output
Remote Trigger Voltage 3 - 32V DC at 5mA or greater 3 - 32V DC at 5mA or greater 3 - 32V DC at 5mA or greater
Dimensions (HxWxD) 7.75” x 17.2” x 18” 5.0” x 17.2” x 16.2” 4.0” x 17.2” x 15.5”
Weight 90 lbs 51 lbs 41 lbs
Power Requirements 115VAC, ± 3%, 50Hz - 60Hz 115VAC, ± 3%, 50Hz - 60Hz 115VAC, ± 3%, 50Hz - 60Hz
1800 watts, maximum 1440 watts, maximum 1200 watts, maximum
Specifications