Wall, Mounting bracket, For wall use, put bracket here – Oricom TP88 User Manual

Page 15

1. HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must

be adjusted so it will hold the HANDSET.

A. SLIDE OUT B.REVERSE C. SLIDE INTO PHONE

Wall

MOUNTING BRACKET:

FOR WALL USE, PUT BRACKET HERE

2. Insert the HOOKS of the MOUNTING

BRACKET into the matching slots on the back

of the BASE UNIT (as shown).

3. Connect one end of the SHORT TELEPHONE

LINE CORD into the TELEPHONE LINE

CONNECTION JACK on the back of the

BASE UNIT

4. Feed the SHORT TELEPHONE LINE CORD

into the channel in the bottom of the BASE

UNIT and plug the other end of the SHORT

TELEPHONE LINE CORD into the WALL

JACK.

5. Position the WALL MOUNT SLOTS on the

bottom of the BASE UNIT over the two wall

plate studs. Then slide the BASE UNIT down

to lock the phone onto the WALL PLATE.

THI S DEVI CE COMPLI ES WITH PART

15 OF THE FCC RULES. OPERATI ON

I S SUBJECT TO THE FOLLOWI NG

TWO CONDI TI ONS:

(1) THI S DEVI CE MAY NOT CAUSE

HARMFUL I NTERFERENCE. AND.

(2) THI S DEVI CE MUST ACCEPT

ANY I NTERFERENCE RECEI VED.

I NCLUDI NG I NTERFERENCE THAT

MAY CAUSE UNDESI RED OPERATI ON.