Optimus STAV-3680 - Manual (Page 7)

7
Preparing Your Receiver
Connecting the A and B Speakers
Follow these steps to connect the right speaker to the receiver’s right FRONT
SPEAKERS A terminals.
1. Lift the receiver’s FRONT SPEAKERS A R (+) red lever and insert the ridged
or color-coded conductor’s end into the small hole. Pull back the lever to
secure the conductor.
2. Lift the receiver’s FRONT SPEAKERS A R ( – ) black lever and insert the other
conductor’s end into the small hole. Pull back the lever to secure the con-
ductor.
3. Connect the ridged or color-coded conductor’s loose end to the right
speaker’s positive (+) terminal.
4. Connect the remaining loose conductor to the right speaker’s negative (–)
terminal.
Repeat Steps 1 through 4 to connect the left speaker to the receiver’s left FRONT
SPEAKERS A terminals.
Repeat this entire process to connect a second pair of speakers to the FRONT
SPEAKERS B terminals.
Note: Be sure you connect the re-
ceiver’s right and left positive (+) and
negative (–) terminals to the speaker’s
corresponding right and left positive (+)
and negative (–) terminals.
A
B
A
B
R L
R L
FRONT SPEAKERS
L R PRE OUT
SUB
WOOFER CENTER
SPEAKER
REAR
SPEAKERS
L R
AUDIO
IN
PRE OUT
CENTER
AUDIO
IN
Center Speaker
Left Right
Surround
Speakers
Subwoofer
Amplified
Center Channel
Power Amplifier
Right Front A Speakers Left
Right Front B Speakers Left