Hyundai H-LCD700 User Manual
Page 8

8
4) System adjustment
Press die [MENU] button four times continuously, then display the system
adjustment. Press [CH+] or [CH-] button to select the item. Press [V+] or [V-] button
to change the functions. The screen displays:
C.SYS: Press [V+] or [V-] to switchover the color system. The color system
which can switchover are as follow: AUTO, PAL, P3.58, N3.58, N4.43, SECAM.
The unit original color system is AUTO.
S.SYS: Press [V+] or [V-] to switchover the TV sound system. The TV sound system
which can switchover are as follow: M, BG, I, DK.
SWAP: Press [CH+] or [CH-] to choose the program swap item. The function allow
you to the currently channel number to the channel number which you need to swap.
Press [CH+] or [CH-] to choose target channel (it means the channel has been chosen,
when the color of the channel number's change to red.), press [V+]or [V-] to add or
reduce the number, then press [CH+]or[CH-] to choose currently channel number,
press [V+] or [V-] to realize the function.
COPY: Press [CH+] or [CH-] to choose program copy item. The function allow you
to copy currently channel number to the channel number which you need. Press
[CH+] or [CH-] to choose target channel number (it means the channel has been
chosen, when the color of the channel number's change red.), Press [V+] or [V-] to
add or reduce the number, then press [CH+] or [CH-] to choose currently channel
number, press [V+] or [V-] to realize the function.
WEAK SIGNAL: Usually, the weak signal has been set to ON, even the weak signal
can be Received in good condition. The weak signal would be set to OFF when using
AV Output function, if not, the AV output would be without color.
5)
-set function:
Press the [MENU] button for five times continuously, you would find the pre-set
function menu. Press [CH+] or [CH-] to choose item which you request, then press
[V+] or [V-] to switchover the item. The format is as follows: