Olympus FL-40 - Manual (Page 20)

60
Taking Pictures in the MANUAL Flash Mode
You can manually set the illumination for your pictures.
1 Press the flash's MODE button until "MANUAL" appears on the
flash's control panel.
2 Set the illumination from the GNO/ISO up/down buttons.
Setting is possible in 1/4 EV steps.
1
2
E
Setting Illuminating Angle Manually
The illuminating angle of the flash can be set manually.
WIDE:58
°
vertical, 70
°
horizontal (It covers field angle of 28 mm lens.)*
TELE:28
°
vertical, 34
°
horizontal (It covers field angle of 80mm lens.)*
* Converted into 35 mm film camera angle.
1 Press the flash's T/W button.
2 Check the selected illumination angle( "WIDE" or "TELE") is
displayed.
MEMO
• In wide-angle zooming, the edges of pictures can be darkened by setting the flash's
illuminating angle to "TELE" (telephoto).
1
2