Opticon OPL972X - Manual (Page 19)

OPL972X/CRD972X OPTICON - 19
2.5.2 SECURITY
To provide additional security connections, the Bluetooth specification allows you to enable a special
security setting, so that a PIN-code is required from the barcode data collector in order to establish a
connection.
If you want to use 'unsecured' connections, do not set the PIN-code.
Discovery
The discovery method is a more automated method. The bar code
data collector will try to discover all Bluetooth devices in range (up
to a maximum of 10 devices).
The address and the name of each Bluetooth device is shown one
by one in the display.
Navigate downwards by the right key [Q2] and navigate upwards
by the left key [Q1].
When device that should be used for communication is found,
select it by the middle [Trigger]key.
Start the system menu.
Select option Input PIN-code.
Select option Input PIN-code.
Set PIN-code
The code shown is either ……………., or the code that was
entered before.
The PIN-code is a code of 1 to 16 digits. Any personal combination
of numeric values can be set.
The digits of the address can be selected one by one by the block
marker.
Change the digit by pressing the left key [Q1]. Every time the left
key [Q1] is pressed the value of the digit is going up with one
numeric value. When the proper value is displayed move the
marker to the next digit with the right key [Q2]. When the setting of
the code is done, confirm by the middle [Trigger]key.
Delete PIN-code
The PIN-code is seen as not set when all digits are set to none
(…………….)