Outlaw Audio 1070 - Manual (Page 49)

9 Model 1070 7.1 Channel Surround Sound Receiver
Owner’s Manual
Care and Maintenance
Sanyo 0047, 0104, 0240
Scott 0184, 0121, 0043, 0045
Sears 0037, 0042, 0000, 0035, 0047, 0104
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Singer 0072
Sony 0033, 0032, 0000, 0035, 0636, 1032
Sylvania 0035, 0081, 0000, 0043
Symphonic 0000
TMK 0240
Teac 0000
Technics 0035, 0162
Teknika 0000, 0035, 0037
Thomas 0000
Tivo 0618, 0636
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Vector Research 0038
Video Concepts 0045
Videosonic 0240
Wards 0035, 0060, 0000, 0047, 0240, 0042, 0048, 0072, 0081,
0149
White Westinghouse 0072, 0278, 0209
XR-1000 0072, 0000, 0035
Yamaha 0038
Zenith 0039, 0000, 0033, 0209, 0479
VIDEO ACCESSORIES
Manufacturer/Brand Setup Code Number
Panasonic 1120
Pioneer 1010
Sensory Science 1126
Sharp 1010
Care and Maintenance
Cleaning
When the unit becomes dirty, wipe it with a clean, soft, dry cloth. If necessary,
first wipe the surface with a soft cloth slightly dampened with mild soapy water,
then with a fresh cloth dampened with clean water. Wipe dry immediately
with a dry cloth. NEVER use benzene, thinner, alcohol or any other volatile
cleaning agent. Do not use abrasive cleaners, as they may damage the finish
of the metal parts. Avoid spraying insecticide, waxes, polishing agents, or any
aerosol product near the unit.
When You Are Away
If you will not be using your home theater system for an extended period of
time, it is always a good idea to turn the unit off using the MAIN POWER button
on the rear panel of the Model 1070. This will prevent the automatic turn on
circuits from accidentally turning the system on during your absence.
System Reset
In rare cases the Model 1070’s internal processor may freeze or lock-up causing
abnormal operation. This is common to all microprocessor-controlled devices when
the unit is subject to excessive static discharge, AC line noise, or power spikes.
In most cases it is easy to solve this problem by simply unplugging the
Model 1070 from its AC power source for about five minutes. After waiting,
reconnect the power cord and turn the unit on. If the unit functions normally,
no further action is needed.
In the event that the unit still does not operate properly, it may be necessary to
manually reset the processor. Note, however, that when the processor is reset
you will lose all settings including digital audio assignments, surround mode
settings, speaker configurations, tuner presets and any other memory items.
For this reason we strongly recommend that you record these settings on the
chart provided on page 25 of this manual so that it is easy to restore them after
resetting the processor.
To perform a system reset:
1. Turn the rear-panel MAIN POWER switch on. The STANDBY/ON
indicator on the front panel will glow amber.
. Turn on the Model 1070 by pressing any of the input source
buttons.
. Press the MENU and MUTE buttons on the front panel at the same
time.
“PRESS (1) TO LOAD DEFAULT” appears in the front-panel display.
. Release the the MENU and MUTE buttons.
5. Within five seconds, press the 1 button on the remote control.
“OUTLAW AUDIO/MODEL 1070” appears briefly to indicate that the unit
has been reset. The unit will then return to normal operation.