Preparation for use operations – Sylvania RSDCT2703R User Manual

Page 3

PREPARATION FOR USE

OPERATIONS

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)

▲ or ▼ button.

3) Adjust the volume to the desired listening level using the VOL(ume)

▲ or ▼ button.

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP

button on the remote control repeatedly. The timer is set up
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:
Press the SLEEP button
repeatedly until "SLEEP 0"
is displayed.

You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel)

▲ or ▼ button to point

to "CAPTION".

3) Press the VOL(ume)

▲ or ▼ button to select

the mode you wish.

4) When done, press the MENU button to exit

the menu.

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ C1]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ C2]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ T1]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [ T2]

: Press the VOL(ume)

▲ or ▼ button.

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume)

▲ button so that "PICTURE" is selected.

3) Select the feature you wish to adjust with the CH(annel)

▲ or ▼ button and adjust it with the

VOL(ume)

▲ or ▼ button.

INSTALLING THE BATTERIES

1) Slide the battery compartment cover on the remote unit.
2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity

(+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit.

3) Replace the cover.

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel)

▲ or ▼ button to point to "[ENGLISH]".

5) Select "ENGLISH" or "FRANÇAIS" = French by using

the VOL(ume)

▲ or ▼ button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL

▲ or ▼ button.

To preset a channel or to change a preset channel, follow the procedure
below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel)

▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲ button.

4) Press the CH(annel)

▲ or ▼ button to point to "AUTO MEMO".

Then, press the VOL(ume)

▲ button.

The tuner scans and memorizes all active channels in your area.

●

The TV distinguishes between standard TV channels and cable channels.

●

When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.

●

When you press the CH(annel)

▲ or ▼ button after selecting AUTO MEMO,

the tuner will stop at the memorized channels only.

●

The TV may recognize TV channels to be CATV channels by the receiving conditions. In this
case, try AUTO MEMO action again in the fine receiving conditions.

[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel)

▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲ button.

3) Press the VOL(ume)

▲ button so that "ADD/DELETE" is selected.

4) Use the CH(annel)

▲ or ▼ button to select the channel you wish to put

into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.

●

Press the VOL(ume)

▲ or ▼ button to light up the channel number

in LIGHT BLUE if you wish to add the channel into memory.

●

Press the VOL(ume)

▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

STEREO SOUND SYSTEM

This function is suppresses noise, restores the dynamic range and electroni-
cally expands the stereo signal to create a more spacious sound effect.
1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel)

▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲ button.

3) Press the CH(annel)

▲ or ▼ button so that "STEREO" is selected.

4) Press the VOL(ume)

▲ or ▼ button to select the stereo mode on or off.

Stereo sound is effective when the "STEREO" is on.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]

ADD/DELETE
AUTO MEMO
STEREO [ON]

PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]

ADD/DELETE
AUTO MEMO
STEREO [OFF]

ADD/DELETE
AUTO MEMO
STEREO [ON]

[-]

GAME MODE

[+]

OFF

[-]

BRIGHT

[+]

[-]

CONTRAST

[+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]

SHARPNESS

[+]

GAME MODE
Set to the most suitable position for TV
GAME.

[+] : ON

[ - ] : OFF

BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST
Adjust to increase or decrease contrast.

[+] : increase contrast [-] : decrease contrast

COLOR
Adjust to be brilliant or pale color.

[+] : be brilliant color [ - ] : be pale color

TINT
Adjust to obtain natural skin tones.

[+] : greenish tone [ - ] : reddish tone

SHARPNESS
Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●

“+” is achieved by pressing the VOL(ume)

▲ button and “-” by pressing the VOL(ume)

▼ button.

●

In the above steps, the picture adjustment
display will disappear from the TV screen

automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume)

▲ button so that "PIC-

TURE" is selected. Then, press the
CH(annel)

▲ or ▼ button repeatedly until

the display returns to the screen.

●

If you adjust any picture control after you
set the Game mode to [ON], the Game mode
is set to [OFF] automatically.

[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. “GAME”
appears on the TV screen.

●

To exit the Game mode and external input
mode, press the GAME button on the remote
control again.

●

To cancel the Game mode only, adjust the
picture control. In this case, “VIDEO” instead
of “GAME” appears on the TV screen.

●

If you press the GAME button when the TV
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.

: Press the CH(annel)

▲ or ▼ button.

L6605CF.QX33 03.3.19 4:01 PM Page 3