beautypg.com

Cool care zone – Ariston MBT 2022 HA User Manual

Page 20

background image

20

GB

WATER LEVEL

MAX

W

A

TER LEVEL

MAX

W

A

TER LEVEL

MAX

the lowest bin and the special COOL CARE ZONE bin,

which has an adjustable temperature) and place the

food directly onto the evaporator plates.

! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the

freezer door. This will help maintain the temperature inside

the freezer, ensuring that foods are conserved for at least 9

-14 hours.

Cool Care Zone

The Cool Care Zone is a special compartment in the

freezer which allows the user to choose between 4

different operating modes that may be set according to

specific requirements and the type of food stored inside.

The temperature settings that may be selected are -8°C, -

12°C and -18°C, indicated by the icons depicting a

strawberry, an ice cream and a bottle on the control

panel. The Cool Care Zone is equipped with controls that

may be operated independently from the other

compartments inside the freezer, by the Cool Care Zone

may also be deactivated using the control panel, so that it

can then be used as a normal freezer compartment.

ICE CARE tray

The fact that they are situated on the top part of the

freezer drawers ensures greater cleanliness: the ice no

longer comes into contact with the food placed inside the

freezer compartment; furthermore, the dripping of the

water during filling is avoided (a lid to cover up the hole

after filling with water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to melt

and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the tray

back.

5. When the ice has formed (minimum time approximately

8 hours) knock the tray against a hard surface and wet

the outside so that the ice cubes come loose and take

them out through the opening.

This manual is related to the following products: