Sylvania HT6051FB - Manual (Page 19)

EN EN
Functions
5 ms
10 ms
10 ms
10 ms
10 ms
15 ms 20 ms
0
5
10
15
20
25
30
35
40
0 5 10 15 20 25 30 35 40
DISTANCE FROM FRONT SPEAKERS (FEET)
USABLE SPEAKER PLACEMENT RANGE WITH XX ms DELAY TIME
10 m
s
10
m
s
10
m
s
10 m
s
15 m
s
20 m
s
25 m
s
25 m
s
PREFERRED
ACCEPTABLE
NOT RECOMMENDED
DIFFERENTIAL
ARRIVAL TIME
DI
ST
ANCE FR
OM REAR SPEAKERS (
FEET)
25 ms
-10 ms
-5 ms
0 ms
0 ms
0 ms
0 ms
5 ms 10 ms
0
5
10
15
20
25
30
35
40
0 5 10 15 20 25 30 35 40
DISTANCE FROM FRONT SPEAKERS (FEET)
USABLE SPEAKER PLACEMENT RANGE WITH XX ms DELAY TIME
0 m
s
0 m
s
0 m
s
5 m
s
10 m
s
15 m
s
15 m
s
15 m
s
PREFERRED
ACCEPTABLE
NOT RECOMMENDED
DIFFERENTIAL
ARRIVAL TIME
DI
ST
ANCE FR
OM REAR SPEAKERS (
FEET)
AUDIO Setting C
5 5 4 4
AUDIO
DRC ON
DELAY TIME
BALANCE
ENTER
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
3 in the “CUSTOM Menu” section on page 17.
Select the desired item.
AUDIO menu
6 6 To exit the menu.
SETUP
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
BALANCE:
DRC ON
DELAY TIME
BALANCE
OFF
DELAY TIME:
DRC ON
DELAY TIME
BALANCE
BALANCE
TEST
FRONT(L) 0db
CENTER 0db
FRONT(R) 0db
SUB WOOFER 0db
SURROUND(R) 0db
SURROUND(L) 0db
DRC ON
DELAY TIME
BALANCE
DELAY TIME
DISTANCE FEET
FRONT(L/R) 10ft
CENTER 10ft
SURROUND 10ft
DEFAULT ON
Hint Hint
DELAY TIME:
• It is not possible to adjust
this item if CENTER and
SURROUND have been
set to “NONE” in the
SPEAKER SIZE setting.
• When “DEFAULT” is
selected and [ENTER] is
pressed, all the items are
restored to their factory
default settings.
BALANCE:
• While the test tone is
being output, the channel
balance adjustment can
not be made.
• When test is selected, no
test tone will be output
from Subwoofer.
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
or
Select the
desired
setting.
or
ENTER ENTER ENTER
Select the
desired
setting.
or
ENTER ENTER ENTER
-1 : DELAY TIME
With 5.1-channel surround sound, ideally the distance between
the listening position and all the speakers (exclude Subwoofer).
The delay time setting can be used to make the sound from the
different speakers reach the listening position at the same time.
Use [K K / L L ] to select the setting item, then press [ENTER].
• Using [K K / L L ] select the speaker to set, then press [ENTER].
DISTANCE (Default :FEET):
• METERS (when [ENTER] is pressed):
The Speaker Unit of distance is set to meters (“m”).
• FEET (when [ENTER] is pressed):
The Speaker Unit of distance is set to feet (“ft”).
FRONT(L/R), CENTER, SURROUND (DEFAULT : 10FT):
• FRONT(L/R):
The distance can be set within the range of 0 to 60 feet.
• CENTER, SURROUND:
These are depends on the setting value of FRONT (L/R).
C
-2 : BALANCE
When the channel level differs from each speaker, the
adjustment can be made in the player of dB (-12dB to 0dB).
TEST:
• Use [K K / L L ] to select “TEST”, then
press [ENTER]. The test tone will out-
put from each speaker in turn.
CHANNEL LEVEL:
• Use [K K / L L ] to select the speaker to
set, then press [ENTER].
• Use [K K / L L ] to select the desired level
for each to select the desired level for
each speaker, then press [ENTER].
C
TEST
FRONT(L) 0db
CENTER 0db
FRONT(R) -1db
SUB WOOFER 0db
SURROUND(R) -2db
SURROUND(L) -5db
FRONT(L)
0db
-1db
-2db
-3db
-4db
-5db
« DELAY TIME setting for Dolby Digital »
( See -1 below for more details.) C
(See -2 below for more details.) C
– 19 –
« DELAY TIME setting for Dolby Pro Logic II »
Hint Hint
• The wireless transfer time of the rear speaker may affect the delay
time setting.
E61TAUD_ENSP.qx33 05.8.9 10:51 AM Page 19