Oreck compact canister Vaccum - Manual (Page 8)

Problems Possible Source Areas to Check
Cleaner Will Not Run 1. Not plugged in properly 1. Be sure cleaner is firmly
plugged into wall outlet.
2. No electricity in wall outlet. 2. Check electrical
source–fuse or
circuit breaker.
3. Motor protector tripped. 3. See “Motor Protection
System” page 1.
4. Needs service. 4. Take to service center
or call for nearest
service center.
Vacuum Will Not 1. Filter bag is full. 1. Replace filter bag. See
Pick Up Or Has “Changing the Filter Bag,”
Low Suction page 5.
2. Hose/wand tool is clogged. 2. Remove obstructions.
3. Air leak due to missing or 3. Replace gasket.
damaged gasket. See page 6.
Tools/Wands Will Not 1. Proper friction fit not 1. Push and turn.
Stay Together being obtained.
E N G L I S H
Troubleshooting Guide
ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.
7
To order call:
US: 1-800-989-3535
CANADA: 1-888-676-7325
Replacement Treated
Filter Bags (12 pk. with
1 Micro Filter)
No. PKBB12DW
Replacement
Micro Filter
No. 72005-01
Replacement White
Bag Gasket
No. 72017-02
Vinyl Tool Rack No. CADDYBB
Oreck Fresh Air® Tabs No. AIRTABS
A
CCESSORIES
S
OLD
S
EPARATELY