Olympus DS-3300 User Manual

Page 71

When recording voice to be
processed with voice recognition, set
up your DSS recorder as follows to
improve recognition accuracy.

• Set the microphone sensitivity to “DICT.”

(

☞ P.27).

• Set the recording mode to “SP”

(

☞ P.28).

• Set the Variable Control Voice Actuator

(VCVA) to “OFF” (

☞ P.29).

• Register/enroll your voice in the voice

recognition software using the recorder.

• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10

cm (2 to 4 inches) away from your chin.

• Speak normally.
• It is recommended to use the noise-

cancellation microphone, ME12, when
recording.

Dictation files recorded under the
following conditions cannot be
processed by voice recognition
because their recognition accuracy
rates will be very low.

• A conference or meeting where many

voices are recorded.

• Seminar or lecture where high-level

ambient noise tends to be recorded.

Notes on Recording For Voice Recognition

Using V

oice Recognition Software (Optional)