Oricom PMR3000 - Manual (Page 11)

11
This pack contains
2 UHF radios •
2 belt clips •
2 PTT headsets •
2 Ni-Mh rechargeable battery packs •
1 twin desk top charger •
1 AC adaptor •
Installing the batteries
Each radio uses a Ni-Mh rechargeable battery pack (supplied).
Or for added convenience you can choose to use 3 AAA alkaline
batteries in each radio (not supplied).
Warnings
Do not mix old and new batteries. •
Do not charge alkaline or non rechargeable batteries as they •
could explode and cause injury.
If you are not using the radios for an extended period remove
•
the batteries.
For replacement Ni-MH battery packs (Order Part No. KEBT-079-1)
contact Oricom (02) 4574 8888.
1. Ensure radio is turned off. Remove the belt clip on
the back.
2. Locate the clip on the
battery cover. Use your
fingernail to gently prise
open the battery cover
and remove.
3. Insert the battery pack
supplied with charge contacts facing towards you and then
replace the battery cover.
Clip
Getting Started