Monet, Architectural specification lighting controls – Sylvania D3208 User Manual
Page 11

4.25 (108.0)
4.72 (119.9)
MNI15-1LW
Architectural Specification Lighting Controls
C
11
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
MONET
®
LIGHTING CONTROLS • 600–1200 WATTS • 120–277V AC 60Hz
Commercial Grade Lighting Controls
MNI06-1LW
Monet Architectural Specification Grade Preset Controls
120V and 277V AC 60Hz
Low-profile Architectural Decora Digital Preset Slide Dimmers with LED locator light. Most
Monet dimmers provide single-pole (1 location) and 3-way (multi-location) control with
Switching Remote.
Incandescent 120V AC
U R
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT
Monet Dimmer (narrow fin)
MNI06-1LW
600W
I, W, A, G, E, B
Monet Dimmer (narrow fin)
MNI10-1LW
1000W
I, W, A, G, E, B
Monet Dimmer (wide fin)
MNI15-1LW
1500W
I, W, A, G, E, B
Monet Incandescent Dimmer, Single-Pole,
MNI06-10W
600W
I, W, A, G, E
Unlighted (narrow fin)
Monet Incandescent Dimmer, Single-Pole,
MNI10-10W
1000W
I, W, A, G, E
Unlighted (narrow fin)
Low-Voltage 120V AC
U R
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT
Monet Dimmer (narrow fin) Electronic
MNE04-1LW
400VA (320W)
I, W, A, G, E, B
Monet Dimmer (narrow fin) Magnetic
MNM06-1LW
600VA (450W)
I, W, A, G, E, B
Monet Dimmer (narrow fin) Magnetic
MNM10-1LW
1000VA (800W)
I, W, A, G, E, B
Monet Dimmer (wide fin) Magnetic
MNM15-1LW
1500VA (1200W) I, W, A, G, E, B
Mark 10
™
Fluorescent Ballast 120 and 277V AC
U R
For Advance Mark 10
™
Powerline fluorescent dimming ballasts.
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT
Monet Mark 10 Fluorescent Dimmer (narrow fin)
MNX10-1LW
1000VA 120V AC I, W, A, G, E, B
Monet Mark 10 Fluorescent Dimmer (wide fin)
MNX15-1LW
1500VA 120V AC I, W, A, G, E, B
Monet Mark 10 277V Fluorescent Dimmer
MNX20-7LW
2000VA 277V AC I, W, A, G, E, B
(narrow fin)
Monet Mark 10 277V Fluorescent Dimmer
MNX30-7LW
3000VA 277V AC I, W, A, G, E, B
(wide fin)
Fan Speed Controls 120V AC
U R
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT
Monet Fan Speed Control (narrow fin)
MNF07-1LW
7.5A 120V AC
I, W, A, G, E, B
Monet Fan Speed Control (wide fin)
MNF10-1LW
10A 120V AC
I, W, A, G, E, B
Monet Accessory Products
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT
Monet Remote Non-Dimming Switching
MN00R-D0W
No load rating,
I, W, G, E, A
Unit for 3-Way Applications
use with
(Unlighted)
120V & 277V
Monet
dimmers only
Color Change Kits for MN00R-D0W Monet
MNK0R-00
—
I, W, G, E, A
3-Way Switching Unit
Color Change Kit for Narrow Fin Monet
MNKIT-SL
—
I, W, A, G, E, B
Lighted Controls
Color Change Kit for Wide Fin Monet
MNKIT-1L
—
I, W, A, G, E, B
Lighted Controls
Color Change Kit for Monet Unlighted Dimmers
MNKIT-S0
—
I, W, A, G, E
Monet Adapter Plate: Allows any Decora
MN0LA-000
—
Metal
strap-mount device to be ganged with
(large)
Heat Sink
either small or large-size Monet controls.
MN0SA-000
In multi-gang installations, must use on ends
(small)
Note: Mark 10
™
is a trademark of the Advance Transformer Company.
NOTE: Multi-gang wallplates are available for combining narrow and wide dimmers, with or without fins removed. Refer to page C13.
2.64 (67.1)
2.75 (69.9)
1.57
(39.9)
0.24
(6.10
4.72 (119.9)
CAUTION ON RETROFITS: When
retrofitting Mark 10
™
Powerline dim-
ming ballasts into fixtures that origi-
nally had Instant Start ballasts, the
sockets MUST be replaced with Rapid
Start sockets to allow proper dimmer
operation and prevent damage to the
dimming ballast. Refer to the instruc-
tions provided with the ballast and the
Leviton Mark 10
™
dimmer.
Monet Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.25" (108.0 mm)
4.72 (119.9)
2.64 (67.1)
2.75 (69.9)
0.24
(6.1)
3.28 (83.3)
1.57
(39.9)
MN00R-D0W
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly
connected to the load as indicated by the device’s wiring instructions.
See page C12 for Monet Specifications and Features
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com