Optimus 31-3042 - Manual (Page 36)

18
Basic Operation
Using Headphones To listen with headphones (not supplied), insert the headphones’ 1 / 4 -inch plug
into the receiver’s front panel PHONES jack. To silence the speakers and listen
with headphones without disturbing others, press SPEAKER so only SP
appears on the display.
Listening Safely
To protect your hearing, note the following when using headphones.
• Set the volume to its lowest setting before you begin listening. After you
begin listening, adjust the volume to a comfortable level.
• Do not listen at extremely high volume levels. Extended high-
volume listening can lead to permanent hearing loss.
• Once you set the volume, do not increase it. Over time, your ears adapt to
the volume level, so a volume level that does not cause discomfort might
still damage your hearing.
Muting the Receiver To temporarily mute the sound, press MUTING on the remote control. --MUT-
ING -- appears. Press MUTING again to restore the audio level.
Loudness Control To increase the high and low ranges of sounds for improved audio at a low lis-
tening level, press
LOUDNESS (or LOUD on the remote control) so LOUDNESS
appears. Press LOUDNESS (or LOUD ) again to turn off this feature.
Bypassing the Sound
Controls (Remote Control
Only) To bypass your receiver’s sound controls ( BASS , TREBLE , BALANCE , or any spe-
cial sound options) so you can hear the audio at its original tonal quality (for
example), press
DIRECT on the remote control so DIRECT appears. Press
DIRECT again to turn off this feature.
Note: When you turn off the bypass feature, you will have to reselect any
desired special sound options (see “Using Advanced Sound Options” on
Page 21).