Orion Car Audio XTRPRO154 - Manual (Page 6)

© 2010 directed electronics—all rights reserved 5
Parallel — One Speaker (dual 4 ohm voice coils)
One dual 4 ohm voice coil woofer with voice coils in parallel results in a 2 ohm load
to the amplifier.
4 ohm 4 ohm
+ +
+
Figure 4
Figura 4
Abbildung 4
_ _
_
1. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire both positive (+) terminals of the woofer to the positive (+) terminal on
the amplifier. Wire both negative (-) terminals of the woofer to the negative (-)
terminal on the amplifier.