Sylvania SRDD495 - Manual (Page 12)

– 12 – EN
VCR Functions
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record tab.
To record on it later, cover the hole with
adhesive tape.
Record tab
• Select the chan-
nel to record.
1 1 2 2
with tab
SP
• Select the desired
tape speed.
3 3
REC
4 4
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Recording/Playback Time Tape Speed
1 2 3
4 5 6
7 8 9
0
SPEED
REC/OTR
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR(8:00) OTR(7:30)
5 5 6 6
STOP
OPEN/CLOSE
/EJECT
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel” section.
POWER
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
REC/OTR
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE
ENTER
RETURN
SEARCH MODE
OPEN/CLOSE
/EJECT SPEED AUDIO
CLEAR/ C. RESET
1 2 3
4 5 6
7 8 9
0 +10
6 6
5 5
2 2
3 3
4 4
Press [REC/OTR] repeatedly to select the
desired recording length.
SKIP/CH.
VCR VCR
You CAN NOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press [PAUSE k k ].
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark
represents one minute.
• Press it again to resume recording.
• Pause mode will be automatically cancelled after 5 minutes to prevent damage to
the tape and the video head.
VCR
CHANNEL
OPEN
STOP/EJECT PLAY REC/OTR
POWER
F.FWD REW
VIDEO
AUDIO
1 1 6 6 2 2 4 4
Recording & OTR (One Touch Recording)
1 1
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
This function will playback a tape
repeatedly from the beginning
when the tape reaches to the end.
VCR
VCR VCR
Auto Repeat
or
MENU
2 2
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Hint Hint
• To cancel Auto Repeat, follow steps 1)-2) above. Then, press [B], so that [OFF] appears beside AUTO REPEAT. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen at step 3), press [CLEAR/C.RESET] to exit.
or
•Insert a tape with its record tab
into the unit.
2 2
PROGRAM NUMBER 4
DATE
– – / – –
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – – 1 1
Select an empty program number.
Timer Recording
VCR VCR
VCR or
MENU
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END
TIME
CHANNEL
REC SPEED Available program num-
ber flashes.
3 3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.
or
4 4 Select the desired month
Select the desired day.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 MON
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
• You can program one
year in advance.
or
or
Hint Hint
• If you want to watch one channel while recording another...
1) Press [VCR/TV] to put the unit in TV position.
2) Select a channel you want to watch with the cable box or the satellite box.
5 5
H9805UD_EN/SP.qx3 2005.06.10 15:17 Page 12