Olympus RC-200 - Manual (Page 39)

BACKLIGHT CONTROL
Use this mode to achieve correct
exposure when the subject is
backlit.
1. Press the selftimer/remote
control button and flash mode
button simultaneously. will
be displayed on the LCD panel.
To cancel the Backlight
Control mode, press both
buttons simultaneously again
or close the lens barrier.
2. Position the autofocus mark on
your subject and press down the
shutter release button all the way.
Notes:
This mode cannot be engaged
while the date/time is being
corrected.
To confirm the date/time after
engaging this mode, press the
SET button.
39