Optimus SCR-100 - Manual (Page 7)

7
Cautions:
You must use a Class 2 power source
that supplies 3V AC and delivers at
least 300 mA. Its center tip must be set
to positive and its plug must fit the SCR-100's
DC 3V jack. Using an adapter that does not
meet these specifications could damage the
SCR-100 or the adapter.
• Always connect the AC adapter to the SCR-100
before you connect it to AC power. When you
finish, disconnect the adapter from AC power
before you disconnect it from the SCR-100.
Follow these steps to power the SCR-100 from stan-
dard AC power.
1. Set the adapter’s voltage switch to 3V.
!
14-1252.fm Page 7 Thursday, October 28, 1999 3:27 PM