Optimus 120-2113 - Manual (Page 15)

2. To start automatic memory scan, briefly press AMS. The radio begins
scanning the stored stations, and the current memory location number
flashes. (Do not hold down AMS. This causes the radio to automatically
seek and store six stations into the selected memory group).
3. To stop scanning when the stereo pauses at a station you want to
listen to, briefly press AMS. Otherwise, the stereo continues to scan
the memory group.
Cassette Player Operation
Playing A Cassette
CAUTION: We recommend using C-60 or C-90 cassette tapes. Avoid using C-120
cassette tapes. They are very thin and can easily become tangled
in the tape-handling parts.
Follow these steps to play a cassette tape.
1. Take up any slack by turning the cassette's hub with your finger or a
pencil. Avoid touching the tape.
2. Insert the tape into the cassette compartment with its open edge to
the right. The tape begins to play, and the direction indicator (> or
<) appears on the display.
3. If you are playing a metal or Cr02 (Type ||) tape, press METAL/4 until
MTL appears on the display.
4. Adjust the volume, bass, treble, balance, and fader levels as desired.
Notes: When the tape reaches the end of one side, the cassette player
automatically changes the tape's direction and plays the other
side of the tape. Play continues until you press /\.
During play, you can switch to the other side of the cassette
by pressing << and >> at the same time until the indicator on
the display changes direction.
5. Press /\ all the way in to stop the tape and eject it.
CAUTION: We recommend you press /\ before you leave your vehicle, to
release the tape from the tape-handling parts. This reduces the
possibility of a tape being tangled or damaged.
Fast-Forward and Rewind