Oreck ProShield Plus Ai - Manual (Page 8)

5
Part Number
HEPA filter, 3 pack AIRHEPA3PK
Replacing the HEPA Filter
1. Unplug the air purifier.
2. Firmly pull the upper part of the Front Cover to open.
3. Remove the Front Cover.
4. Pull the tabs located on the bottom portion of the HEPA
Filter to remove. Discard old filter.
5. Insert top of the new HEPA Filter into the Filter Cavity and
then slide in the bottom.
6. Insert bottom of the Front Cover and rotate it forward.
Firmly push on the upper sections of the Front Cover to snap
it in place.
Maintenance
5
2
Part
Number
6
6