Omron SC100 - Manual (Page 6)

6
bATTERy INSTALLATION
BATTERY PLACEMENT
Before using this scale for the first time you must first install the enclosed battery. You
will need to pull out the battery insulation film when you insert the battery for the first
time.
1. Open the battery cover.
2. Put one 3V lithium battery into the battery box
(positive pole upward) and then tightly close the
battery box.
NOTE:
When installing the battery, please do not press the base
of the scale, it may cause an inaccurate measurement.
If this happens, reinstall the battery or place the scale on
a flat surface for at least 20 minutes before you take the
measurement again.
WHEN YOU INSTALL THE BATTERY FOR THE FIRST TIME
1. This is what the display looks like after initial battery placement.
2. After 1-2 seconds the display will return to zero.
3. Place the scale horizontally on a flat surface.
The power turns off after the scale displays the
value automatically (Note: the value 1.5 is
for instance)