Sylvania SRCD227 - Manual (Page 13)

- 13 - EN
1C29
CONNECTING TV/DVD/VHS TO AUDIO SYSTEM
ANT.
L
AUDIO OUT
R
COAXIAL
1
To Right (red) and Left (white)
AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
• Using industry standard audio patch cords, connect one end to the Audio Output Left (white) and Right (red)
jacks on the rear of the TV/DVD/VCR, and the other end to the audio input Left (white) and Right (red) on
the audio system.
ANALOG CONNECTION:
• The analog connection will allow you to take 2 channel stereo sound from the TV/DVD/VCR (or any source
plugged into the front of the TV) and sends the audio signal to an external audio system for amplification.
SELECTING ANALOG AND DIGITAL AUDIO SOUNDTRACKS:
• To listen to digital multi channel DVD audio, please select the Coaxial Digital Audio input on the audio system.
• To listen to analog audio from TV/DVD/VCR (and any source plugged into the front of the A/V input jack),
please select the analog input which you connected the left and right audio jacks.
• For further solutions on selecting analog and digital audio inputs, please refer to your audio systems owners
manual.
SAFETY NOTES: Please turn of the power to all components before making any connections and refer to
the owners manual of the audio system for further installation and operational instructions.
• Using industry standard audio patch cords, connect one end to the Coaxial Digital Audio Out jack on the
rear of the TV/DVD/VCR and the other to the Coaxial Digital Input on the audio system. Then select the
Coaxial Digital Audio Input on the Audio System to listen to multichannel (5.1) DVD sound.
DIGITAL CONNECTION: DVD SOUND ONLY
• If your audio system features a COAXIAL Digital Audio Input jack and Dolby Digital/DTS multi channel
audio decoders, you may take full advantage of the multi channel surround sound capability of DVD discs.
ANT.
L
AUDIO OUT
R
COAXIAL
1
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 6]
[Fig. 7]
ANALOG AND DIGITAL CONNECTIONS:
IMPORTANT NOTES: If you use the COAXIAL Digital audio connection for digital multi channel DVD
sound, you must also make the Analog connection to listen to TV/DVD/VCR (2 channel) and any source
plugged into the front A/V input jack.
ANT.
L
AUDIO OUT
R
COAXIAL
1
To Right (red) and Left (white)
AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
To COAXIAL
DIGITAL AUDIO
input To DIGITAL AUDIO
OUT COAXIAL
JACK
[Fig. 7]
TD530/601_01-36 02.4.5 6:33 PM Page 13