Onkyo Power Amplifier M-5000R - Manual (Page 20)

20
En
Turning On & Basic Operations
Basic Operations
Tip
• After a certain period of warming up, the temperature of the
power amplifier’s components and internal temperature are
stabilized, and the sound will soften.
Note
• The power amplifier remembers the state when power was
previously turned off, and returns to the state.
Note
• See “Setting Auto Standby (ASb)” for the auto standby function
( ➔ 21).
Turning On the Power Amplifier
1 Set POWER to the ON position ( ) on the front
panel.
2 Press ON/STANDBY to turn on the power
amplifier.
The power amplifier comes on, the display lights, and
the Standby LED goes off.
POWER ON/STANDBY
Turning Off the Power Amplifier
1 Press ON/STANDBY to set the power amplifier to
Standby.
The power amplifier will enter Standby mode, and the
Standby LED lights.
2 To completely shut down the power amplifier, set
POWER to the OFF position (
).
POWER ON/STANDBY
Standby LED