Power management system – Optiquest Q53 User Manual
Page 20
15
Optiquest Q53
E
N
G
L
I
S
H
Operation
The monitor automatically goes through the Power Management System steps
when it is idle.
To conserve energy, we recommend turning the monitor off at the power
switch when it will not be used for long periods of time.
State
Horizontal Sync
Vertical Sync
On
On
On
Standby
Off
On
Suspend
On
Off
Off
Off
Off
The monitor goes into these power saving stages with the following video
synchronization signals:
Note:
The Q53 complies with European NUTEK Power Management Standards.
Note:
The Off state means the monitor is in the lowest DPMS state with the
highest power savings.
State
LED
Power
Recovery Time
On
green
95 watts (typical)
N/A
Standby
yellow
<30 watts
<3 sec
Suspend
yellow
<8 watts
<10 sec
Off
yellow
<8 watts
<10 sec
This monitor meets VESA
®
DPMS
™
(Display Power Management Signaling)
standards. For the monitor’s power saving feature to work, the video board or
computer must also meet VESA DPMS standards.
Power Management System